Decorative inlays inlay kits

The HeartEZ Inlay Template

A picture of the EZInlays Hearts template and 9 of the hearts built with the inlay kit

The HeartEZ Inlay Kit

Template: $19.99

Shipping:   $7.50

 

With this single template kit. you can build a single heart, a heart with one inlay, or a heart with two inlays.

 

Click HERE to view the OnLine HeartEZ building tutorial.

Heart Pattern 1 Inlay

Cut inlay and the template.  The inlay was cut with Pattern 1 of the EZInlays Hearts inlay template

Layer 1 Inlay cut w/template

Te routed out void made with Pattern 1 of the Hearts Inlay Kit

Void for Layer 1 Heart cutout

Heart Layer 1 Part I

Zebrawood inlay placed in the void created for it by using Pattern 1 of the EZInlays Hearts inlay template

Layer 1 inlay placed on base material

The Pattern 1 inlay assembled. Tape is applied to cut out the assembly using Pattern 2 of the Hearts inlay template

Layer 1 assembled

Heart Layer 1 Part II

The HeartEZ inlay template has been affixed to the assembled Pattern 1 heart so it can be cut out as the Pattern 2 inlay.

Preparing to cut layer 1 inlay

Using a paint scraper, the Pattern 2 inlay is removed from the backing material

Layer 1 inlay cut

Heart Layer 2

The voiid and inlay cut using Pattern 2 of the HeartEZ inlay template

Layer 2 void and inlay

The pattern 2 inlay assembled, sanded, and ready to be cut out as an inlay using pattern 3 of the HeartEZ inlay template.

Layer 2 assembled

Heart Layer 3

Using the alignment marks Pattern 3 of the HeartEZ inlay template is affixed to the Pattern 2 assembled inlay.

Preparing to cut layer 3

The Pattern 3 ornament has been cut, using the inlay cutting procedures. 

Layer 3 cut

Final Heart Sanded and Finished

The inlaid hearts have been cut out using Pattern 3 of the EZInlays HeartEZ kit.

Pre -final sanding

The heart, created using the EZInlays HeartEZ templae, sanded and finished

Layer 1 with inlays

A picture of the EZInlays Hearts template and 9 of the hearts built with the inlay kit
Cut inlay and the template.  The inlay was cut with Pattern 1 of the EZInlays Hearts inlay template
Te routed out void made with Pattern 1 of the Hearts Inlay Kit
Zebrawood inlay placed in the void created for it by using Pattern 1 of the EZInlays Hearts inlay template
The Pattern 1 inlay assembled. Tape is applied to cut out the assembly using Pattern 2 of the Hearts inlay template
The HeartEZ inlay template has been affixed to the assembled Pattern 1 heart so it can be cut out as the Pattern 2 inlay.
Using a paint scraper, the Pattern 2 inlay is removed from the backing material
The voiid and inlay cut using Pattern 2 of the HeartEZ inlay template
The pattern 2 inlay assembled, sanded, and ready to be cut out as an inlay using pattern 3 of the HeartEZ inlay template.
Using the alignment marks Pattern 3 of the HeartEZ inlay template is affixed to the Pattern 2 assembled inlay.
The Pattern 3 ornament has been cut, using the inlay cutting procedures. 
The inlaid hearts have been cut out using Pattern 3 of the EZInlays HeartEZ kit.
The heart, created using the EZInlays HeartEZ templae, sanded and finished